cricut maker

Using your cricut maker for sewing – Sewing a Circle Pouch

by Faodail Creation Sewing and Quilting – Sewing and Quilting Tutorials

Before we start please bear in mind that each cricut can be different, what works for my machine may not work for yours. Always run a test before making any projects

Visit my Cricut home page and cut out all your parts. https://design.cricut.com/landing/profile/61885f9fce8cbd26112567e4 The sections in pink are external sections and the pieces in green are all internal sections.

You will need :

Two pieces for the external

Two pieces for internal

Pellon Decor Bond 809 Iron on Stabilizer

1.5 x 20″ for the binding

Two 1.5″ x 91/4″ one for external and one for internal

10″ long zipper 5# zipper which is more or less 1 1/4″.

Press the Decor Bond to the back of both external circles and one of the 2″ x 8″ cut all section out with your cricut. I used setting Fabric Cotton, Bonded. Clicked the more pressure and changed the blade from fin point to rotary cutter. Double check that the circle is where you want it to cut on the mat with the fabric. I did two passes with my cricut cut.

Quilt one external section and one internal section together wrong sides together, do the same for the other two circles. I just did straight lines.

Attach the handle on one of the external sections. Find the center of you pouch I folded in 1 in on each end to hide any raw edges.

Now quilt the 1.5″ x 8″ wrong sides together fold in half and find the center, find a center point at the raw edge of one of your circles. Match the marks together and with the external fabrics facing each other stitch into place about an inch on both side of the mark. It may be easiser at this point to wonder clip the fabric into place and ease it in around the curve. If you did clip everything into place un clip. Take your zipper and sew one end to the fabric section then do the same with the other. I applied a binding piece on that zipper part. The turned over the zipper to the right side and top stitched the zipper into place.

Turn the whole pouch inside out. grip all the way around with pins or grips and stitch into place.

do the same with the other side of the circle. Before you do make sure your zipper is OPEN!

I bind the inside and that is completely up to you just hate looking at raw seams.

You finished!

DISCLAIMER: Links below will direct you to my amazon affiliate site. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you!

Sewing a Circle Pouch Shopping list:

Cricut Maker https://amzn.to/4btWFlD
Generic Rotary Blade and Drive Housing for Cricut Maker https://amzn.to/3w5uIQZ
Cricut maker FabricGrip Adhesive Cutting Mat 12″ x 12″ https://amzn.to/3N72AT7
Cricut maker FabricGrip Adhesive Cutting Mat 12″x24″ https://amzn.to/3GkuEPn
Cricut Vinyl StrongGrip Transfer Tape https://amzn.to/3Stzqzt
Cricut BRAYER & MAT REMOVER SET https://amzn.to/494SOdo
Fiskars 18×24 Inch Donna Dewberry Cutting Mat https://amzn.to/3HRkhU0
Fiskars 45mm Comfort Stick Rotary Cutter https://amzn.to/3HQs7gA

___________________________________________________________________________________

All my favorite Amazon products by category https://www.amazon.com/shop/faodailcreation

Copyright 2024 : Faodail Creation Sewing and Quilting – Sewing and Quilting Tutorials

Leave a Reply