This is the full you tube tutorial How to sew a Glasses case with snap fasteners | Easy Sewing Projects for Beginners https://youtu.be/aMdtd8YmTH4
Cassie Cartmell – Faodail Creation
Table of Contents
How to sew a Glasses case with snap fasteners is a fantastic beginner-friendly sewing project if you are looking for something quick, practical, and useful. This easy glasses case can be made from your favourite fabric scraps and finished with a simple snap fastener to keep your glasses safely inside.
If you have been wondering how to sew a Glasses case with snap fasteners, this tutorial will walk you through the entire process from cutting your fabric and adding stabilizer to sewing the curved flap, turning the case right side out, and installing the snap fastener.
This is also a great project for using beautiful directional or non-directional fabrics. However, if you are using a fabric with a definite pattern direction, there is one important thing to remember: the flap folds over, so a directional print could end up appearing upside down.
The finished case is ideal for reading glasses, sunglasses, or everyday spectacles. You can make several to coordinate with your handbag, sewing room, or wardrobe.
How to Sew a Glasses Case with Snap Fasteners – Materials
Below I have included all my Amazon Affiliate links, if you decide to purchase from one of these links I may receive a small commission at no additional cost to you.
This is my Amazon Store Link : https://www.amazon.com/shop/faodailcreation
Before starting how to sew a Glasses case with snap fasteners, gather everything you need.
You will need:
- External fabric – 17 inches × 4½ inches
- Quilter’s batting – 17 inches × 4½ inches
- A second fabric for the lining – 17 inches × 4½ inches
- Stabilizer – 2 inches × 2 inches
- Snap fastener
- Snap fastener installation tool – https://amzn.to/4qAvaz3
- Fabric marking pen – https://amzn.to/4y1b5Ek
- Fabric hole punch – https://amzn.to/3U9ukx5
- Curved ruler – https://amzn.to/4giAbbU
- Sharp fabric scissors – https://amzn.to/46rLMiU
- Pinking shears – https://amzn.to/46m1FHH
- Iron – https://amzn.to/4wMUwuQ
- ironing board https://amzn.to/45SL9ij
- Sewing machine
- 90/14 Microtex needle – https://amzn.to/4gvTOvP
- Gutermann thread – https://amzn.to/4xWQr8j
- Sewing turning tool – https://amzn.to/4xTebKs
Choosing Fabric for Your Glasses Case – How to Sew a Glasses Case with Snap Fasteners
When learning how to sew a Glasses case with snap fasteners, fabric selection is important.
I recommend choosing a plain fabric or a multi-directional print. A multi-directional print works particularly well because the flap folds down over the front of the case.
If your fabric has flowers, animals, stripes, or another design that has a definite top and bottom, take a moment to consider how the fabric will look after the case is assembled.
Why Stabilizer Is Important – How to Sew a Glasses Case with Snap Fasteners
The 2-inch × 2-inch piece of stabilizer is used where the snap fastener will be attached.
A snap creates pressure on the fabric every time the case is opened and closed. Adding stabilizer gives this area extra strength and helps prevent the fabric from stretching or tearing.
You can use light-, medium-, or heavy-weight stabilizer depending on what you have available. Medium-weight stabilizer is a good general-purpose option.
How to Sew a Glasses Case with Snap Fasteners Step by Step
Now that your materials are ready, let’s start making the case.
Step 1: Cut Your Fabric – How to Sew a Glasses Case with Snap Fasteners
Cut your two fabric pieces to 17 inches × 4½ inches.
You will have:
- One external fabric piece
- One lining fabric piece
Cut your quilter’s batting to the same size.
You will also need one 2-inch × 2-inch piece of stabilizer for the snap fastener area.
Accurate cutting will make the rest of this project much easier. When learning how to sew a Glasses case with snap fasteners, take your time at this stage because accurate measurements help create a neat finished case.
Step 2: Find the Centre of the Fabric – How to Sew a Glasses Case with Snap Fasteners
Take your external fabric and fold it in half.
Finger press the fold to create a temporary centre mark. Repeat this process with the opposite end of the fabric.
These centre marks will help you position the stabilizer correctly.
You do not need to create a heavy crease. A light finger-pressed line or small fabric marker is enough.
Step 3: Add the Stabilizer – How to Sew a Glasses Case with Snap Fasteners
Take your 2-inch × 2-inch stabilizer.
If you are using fusible stabilizer, you should be able to identify the adhesive side by touch. Place the adhesive side against the wrong side of the fabric.
Position the stabilizer approximately ¼ inch down from the top edge, centred on your marking.
Repeat this on the other end if your design requires stabilizer in both snap locations.
Take the fabric to your ironing board and carefully press the stabilizer into position according to the manufacturer’s instructions.
This small step makes a big difference when learning how to sew a Glasses case with snap fasteners because the snap needs a strong foundation.
Step 4: Mark the Curved Flap – How to Sew a Glasses Case with Snap Fasteners
The top of the glasses case will have a curved flap.
I used a curved ruler with a 1½-inch curve to create the rounded shape.
Place the ruler against the edge of the fabric and mark your curve.
Then turn the ruler over and repeat the marking on the opposite side so that both sides match.
You can use a different curve if you prefer. The important thing is to create a smooth, symmetrical shape.
Step 5: Layer the Fabrics – How to Sew a Glasses Case with Snap Fasteners
Place the quilter’s batting down first.
Put the external fabric on top of the batting.
Then place your lining fabric on top with the right sides of the two fabrics facing each other.
Your layers should therefore be:
- Quilter’s batting
- External fabric
- Lining fabric
Clip or pin the layers together so they do not shift while sewing.
How to Sew the Curved Glasses Case
The next stage is where the glasses case starts to take shape.
Step 6: Sew Around the Case – How to Sew a Glasses Case with Snap Fasteners
Before sewing, mark an opening that you will leave unstitched.
You need this opening so that you can turn the project right side out later.
Take the layered fabric to your sewing machine.
Start sewing at your marked starting point. Reverse stitch at the beginning to secure your stitches.
Continue sewing around the case, following the curved flap.
When you reach the curve, slow your sewing speed down.
Sewing Around the Curve
Curves are much easier to sew when you take your time.
Rather than trying to turn the fabric in one large movement, make small adjustments as you sew around the curve.
If your sewing machine has an automatic presser-foot lift or pivot function, this can make the process easier.
Stop when necessary, lift the presser foot, reposition the fabric slightly, and continue sewing.
Continue around the remaining edge until you reach your marked opening.
At the end, reverse stitch again to secure the seam.
Step 7: Trim the Seam Allowance – How to Sew a Glasses Case with Snap Fasteners
Remove the project from your sewing machine.
Take your pinking shears and carefully trim around the curved seam.
Pinking shears create a zigzag edge that helps reduce bulk and allows the curved seam to turn more smoothly.
Be careful not to cut through your stitching.
You can also trim away small amounts from the bottom corners. Again, take care not to cut into the stitches.
How to Turn the Glasses Case Right Side Out
Step 8: Turn the Case – How to Sew a Glasses Case with Snap Fasteners
Reach through the opening and gently pull the fabric through.
Work slowly around the curved flap.
A blunt metal chopstick or turning tool can help you gently push the corners and curves into shape.
Do not use anything sharp because you could accidentally push through the fabric.
Gently ease out the curved edge until it is smooth.
Step 9: Press the Case – How to Sew a Glasses Case with Snap Fasteners
Take the project to your ironing board.
Carefully turn the raw edges of the opening inward.
Press the entire case flat.
Pay particular attention to the curved flap and the opening.
Taking a little extra time with pressing will give your finished glasses case a much more professional appearance.
Step 10: Topstitch Around the Case – How to Sew a Glasses Case with Snap Fasteners
Return to your sewing machine.
Topstitch around the outside edge of the case.
This does two things: it gives the project a neat finished appearance and closes the opening that you used for turning.
Sew slowly around the curved flap so that your stitching remains even.
How to Sew the Glasses Case Shape
Now we can turn the flat piece into an actual glasses case.
Step 11: Fold the Bottom Up – How to Sew a Glasses Case with Snap Fasteners
Place your glasses on the fabric to determine how high you want the pocket to be.
Fold the bottom section upward.
For my case, the folded section measured approximately 7 inches.
Check that your glasses fit comfortably before sewing the side seams.
Remember that different glasses have different sizes, so this is an excellent opportunity to adjust the pocket if necessary.
Step 12: Sew the Side Seams – How to Sew a Glasses Case with Snap Fasteners
Take the folded case back to your sewing machine.
Sew straight across the existing topstitched line on each side.
This secures the folded pocket and creates the main compartment for your glasses.
Reverse stitch at the beginning and end to secure the seams.
Your case should now have a pocket with a flap that folds over the top.
Now we reach the final and most important stage: adding the snap fastener.
Step 13: Find the Centre
Fold the case closed and find the centre of the flap.
Make a small mark where you want the snap fastener to sit.
I recommend positioning the snap so that it is not too close to the edge of the flap.
Measure your placement carefully before making the hole.
Step 14: Make the Snap Fastener Holes – How to Sew a Glasses Case with Snap Fasteners
Use a fabric hole punch to create the first hole at your centre marking.
Close the flap.
Use the first hole as a guide to determine where the second snap component needs to be positioned.
Mark the location and create the second hole.
Check the placement before installing the snap.
A little measuring now can save you from having to remove a snap later.
Step 15: Understand the Snap Fastener Pieces – How to Sew a Glasses Case with Snap Fasteners
Most snap fasteners consist of four separate components.
You will have the decorative cap, the socket component, the stud component, and the corresponding back piece.
The decorative side should be visible on the outside of your glasses case.
Make sure you understand which components connect together before you begin pressing them into place.
Positioning the Snap
Place the appropriate snap component through the hole in the glasses case.
The raised prong section should pass through the fabric.
Place the matching component over the prongs.
Position your snap installation tool correctly and press firmly according to the instructions for your particular snap fastener.
Repeat the process for the second half of the snap.
Do not rush this step.
If the components are not aligned correctly, the snap may not close properly.
Step 16: Test the Snap – How to Sew a Glasses Case with Snap Fasteners
Once both sides of the snap are installed, close the flap.
Press the two snap components together.
Open and close the case several times to make sure everything is secure.
Place your glasses inside and check that they fit comfortably.
Your new glasses case is now complete!
How to Sew a Glasses Case with Snap Fasteners – Helpful Tips
If this is your first time learning how to sew a Glasses case with snap fasteners, here are a few tips that can make the project easier.
First, always test your snap fastener on a scrap piece of fabric if you have never used that particular type of snap before.
This allows you to understand how the installation tool works before working on your finished project.
Second, do not skip the stabilizer.
Although the stabilizer may seem like an extra step, the snap puts repeated pressure on the fabric. Reinforcing the area helps make your case more durable.
Third, use sharp scissors when cutting your fabric and a sharp pair of pinking shears when trimming curves.
Finally, remember that pressing is part of sewing.
A well-pressed project will usually look much more professional than one that has been sewn without pressing.
Why Make Your Own Glasses Case?
Learning how to sew a Glasses case with snap fasteners gives you a practical project that can be completed relatively quickly.
It is also a wonderful scrap-friendly sewing project.
You can use leftover quilting cotton, fabric from previous projects, or coordinated fabrics from your stash.
The glasses case can also make a thoughtful handmade gift.
Try making one for a friend, family member, teacher, or sewing enthusiast.
You could even create several different versions using seasonal fabrics.
Personalise Your Glasses Case – How to Sew a Glasses Case with Snap Fasteners
Once you know how to sew a Glasses case with snap fasteners, you can easily adapt the project.
Consider adding:
- Appliqué
- Embroidery
- Fabric painting
- Decorative quilting
- Patchwork
- Monogramming
- Contrasting fabric
- Seasonal fabric
- Decorative topstitching
If you are focusing on appliqué projects, this would also be an excellent small project for experimenting with a simple appliqué design before moving on to a larger project.
Final Thoughts – How to Sew a Glasses Case with Snap Fasteners
I hope you have enjoyed learning how to sew a Glasses case with snap fasteners.
This is one of those simple sewing projects that combines practicality with creativity. Once you have made your first case, you can experiment with different fabrics, colours, embellishments, and sizes.
The combination of batting and stabilizer gives the case structure, while the snap fastener provides a convenient way to keep your glasses safely enclosed.
The best part about learning how to sew a Glasses case with snap fasteners is that you do not need a large amount of fabric or a complicated sewing pattern.
It is a great beginner sewing project, a useful scrap-busting project, and a lovely handmade gift.
If you enjoyed this how to sew a Glasses case with snap fasteners tutorial, be sure to check out more sewing tutorials from Faodail Creation. Don’t forget to subscribe to the Faodail Creation YouTube channel, like the tutorial, and leave a comment letting me know what fabric you would use for your own glasses case.
Happy sewing!
Read this next : How to Sew a Fabric Popcorn Pouch : Easy Beginner Sewing Project You’ll Love https://faodailcreation.ca/2026/07/01/how-to-sew-a-fabric-popcorn-pouch/
